LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1556 (Engine Exhaust System - 5.7L) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Catalytic Converter Heat Shield Rivets
    GM64012Courtesy of GENERAL MOTORS CORP.
  1. Remove the catalytic converter. Refer to Catalytic Converter Replacement .
  2. Drill out the catalytic converter heat shield rivets.
  3. Remove the catalytic converter heat shield.
scientia non olet · About LEMON Manuals