LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1552 (Power Steering System) >> Repair Instructions >> Power Steering Reservoir Outlet Pipe/Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Steering Pump, Power Steering Reservoir, Clamp Retaining The Outlet Hose
    GM728065Courtesy of GENERAL MOTORS CORP.
  1. Install the outlet hose (2) to the power steering reservoir (1).
  2. Install the outlet hose to the power steering pump (3).
  3. Install the outlet hose retaining clamps.
  4. Bleed the power steering system. Refer to Bleeding the Power Steering System .
scientia non olet · About LEMON Manuals