LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1552 (Power Steering System) >> Repair Instructions >> Power Steering Pressure Pipe/Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Steering Pump & Power Steering Pressure Hose
    GM65356Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the power steering pressure hose (2) from the power steering pump (1).
  3. Remove the power steering pressure hose (2) from the power steering gear.
  4. Remove the power steering pressure hose (2) from the vehicle.