LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1550 (Parking Brake System) >> Repair Instructions >> Park Brake Shoe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Dust Caution in Cautions and Notices.
    Fig 1: View Of Park Brake Shoes
    GM64008Courtesy of GENERAL MOTORS CORP.
  1. Remove the brake rotor. Refer to Brake Rotor Replacement - Rear in Disc Brakes.
  2. Remove the wheel bearing/hub. Refer to Wheel Bearing/Hub Replacement - Rear in Rear Suspension.
  3. Rotate the parking brake adjusting nut until all park brake shoe adjustment has been removed.
  4. Remove the parking brake shoe retaining spring.
    5. Fig 2: View Of Park Brake Shoe Assembly
    GM64007Courtesy of GENERAL MOTORS CORP.
  5. Remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly.
scientia non olet · About LEMON Manuals