LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1550 (Parking Brake System) >> Repair Instructions >> Park Brake Cable Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear parking brake cable to the vehicle.
  2. Install the rear parking brake cable retainer nut.
    3. Fig 1: Rear Park Brake Cable To Rear Suspension Mounting Bracket
    GM64001Courtesy of GENERAL MOTORS CORP.
  3. Connect the rear park brake cable to the rear suspension mounting bracket.
    4. Fig 2: Front & Rear Park Brake Cables To Equalizer & Retainer
    GM99268Courtesy of GENERAL MOTORS CORP.
  4. Connect the rear park brake cable to the retainer and equalizer.
  5. Install the RH muffler. Refer to Muffler Replacement - Right in Engine Exhaust.
  6. Lower the vehicle.
  7. Enable park brake automatic adjuster. Refer to Enabling the Park Brake Cable Automatic Adjuster .
scientia non olet · About LEMON Manuals