LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1550 (Parking Brake System) >> Repair Instructions >> Park Brake Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Park Brake Shoes
    GM64008Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear brake rotor. Refer to Brake Rotor Replacement - Rear in Disc Brakes.
  2. Rotate the park brake adjuster nut until the bolt is in the closed position.
  3. Remove the park brake shoe retaining spring.
    4. Fig 2: View Of Park Brake Shoe Assembly
    GM64007Courtesy of GENERAL MOTORS CORP.
  4. Remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly.
    5. Fig 3: Actuator Mounting Bolts
    GM338243Courtesy of GENERAL MOTORS CORP.
  5. Remove the two actuator mounting bolts.
  6. Remove the actuator assembly from the dust shield.
scientia non olet · About LEMON Manuals