LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1546 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Mode Door Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
  2. Remove the mode door actuator.
    3. Fig 1: Air Distribution Case Seal, Screws & Mode Door
    GM395306Courtesy of GENERAL MOTORS CORP.
  3. Remove the air distribution case cover retaining screws.
  4. Remove the air distribution case cover.
  5. Remove and discard the air distribution case seal.
  6. Remove the mode door.
scientia non olet · About LEMON Manuals