LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1546 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Mounting Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Compressor Drive Belt Tensioner & Compressor Mounting Bracket
    GM299792Courtesy of GENERAL MOTORS CORP.
  1. Remove the compressor. Refer to Compressor Replacement .
  2. Remove the compressor drive belt tensioner from the compressor mounting bracket.
  3. Remove the compressor drive belt idler pulley from the compressor mounting bracket.
    4. Fig 2: Compressor Bracket & Mounting Bolt
    GM174360Courtesy of GENERAL MOTORS CORP.
  4. Remove the compressor bracket mounting bolt.
  5. Remove the compressor bracket.
scientia non olet · About LEMON Manuals