Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Carefully pull the front floor carpet from under the RH side of the I/P accessory trim plate and the I/P upper trim pad, along the driveline tunnel.
- Release the floor air outlet - inner from the floor air outlet - outer.
- Release the floor air outlet - inner from the floor air outlet lower duct - RH rear, then remove the air outlet.
- Carefully release the floor air outlet - outer from the front floor carpet and remove the outlet.