LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1546 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Air Outlet Duct Replacement - Floor, RH >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Floor Air Outlet Duct, Upper Half & Screws
    GM95650Courtesy of GENERAL MOTORS CORP.
  1. Install the floor air outlet duct, upper half, into position.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the floor air outlet duct retaining screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

    3. Fig 2: RH Lower Closeout/Insulator Panel
    GM95649Courtesy of GENERAL MOTORS CORP.
  3. Install the floor air outlet duct, lower half.

    Align the retaining tabs and snap into place.

  4. Install the RH lower closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals