LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1546 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Air Distribution Duct Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Upper Trim Pad & Air Distribution Duct
    GM95730Courtesy of GENERAL MOTORS CORP.
  1. Install the distribution duct into position on the upper trim pad.

    Insert the duct retaining tabs into the trim pad slots.

    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the air distribution duct retaining screws to the underside of the trim pad.

    Tighten:  Tighten the screws to 1.8 N.m (16 lb in).

  3. Install the I/P upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals