LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1545 (Engine Cooling System -- 5.7L) >> Repair Instructions >> Radiator Hose Replacement - Inlet >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Radiator Inlet Hose
    GM64025Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System .
  2. Remove the radiator upper support. Refer to Radiator Support Replacement .
  3. Reposition the radiator inlet hose clamp from the radiator using J 38185  . See Special Tools and Equipment .
  4. Reposition the radiator inlet hose clamp from the thermostat housing usingJ 38185  . See Special Tools and Equipment .
  5. Remove the radiator inlet hose from the radiator.
  6. Remove the radiator inlet from the thermostat housing.
scientia non olet · About LEMON Manuals