LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1545 (Engine Cooling System -- 5.7L) >> Repair Instructions >> Radiator Hose Replacement - Inlet >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Radiator Inlet Hose
    GM64025Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator inlet hose to the radiator.
  2. Reposition the radiator inlet hose clamp to the radiator using J 38185  . See Special Tools and Equipment .
  3. Install the radiator inlet hose to the thermostat housing.
  4. Reposition the radiator inlet hose clamp to the thermostat housing using J 38185  . See Special Tools and Equipment .
  5. Install the radiator upper support. Refer to Radiator Support Replacement .
  6. Fill the cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals