LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1545 (Engine Cooling System -- 5.7L) >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Coolant Heater Cord
    GM673597Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine coolant heater cord from the engine coolant heater.
  2. Remove the engine coolant heater cord clip bolt.
  3. Remove the engine coolant heater cord strap at the secondary air injection pump hose.
  4. Remove the engine coolant heater cord.
scientia non olet · About LEMON Manuals