Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coolant Air Bleed Hose & Pipe

Courtesy of GENERAL MOTORS CORP.

Install the coolant air bleed hose (2) to the pipe (1).
Position the coolant air bleed hose clamp at the pipe.

Fig 2: Identifying Coolant Air Bleed Hose At Throttle Body

Courtesy of GENERAL MOTORS CORP.

Install the coolant air bleed hose to the throttle body.
Position the coolant air bleed hose clamp at the throttle body.
Add engine coolant, if necessary.