Transmission General Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Transmission General Specifications (4L60-E)
| Name | Hydra-matic 4L60-E |
|---|---|
| RPO Codes | M30 |
| Production Location | Toledo, Ohio |
| Vehicle Platform (Engine/Transmission) Usage | Y |
| Transmission Drive | Longitudinally-Mounted Rear Wheel Drive |
| 1st Gear Ratio | 3.059:1 |
| 2nd Gear Ratio | 1.625:1 |
| 3rd Gear Ratio | 1.000:1 |
| 4th Gear Ratio | 0.696:1 |
| Reverse | 2.294:1 |
| Torque Converter Size (Diameter of Torque Converter Turbine) | 298 mm |
| Pressure Taps | Line Pressure |
| Transmission Fluid Type | DEXRON® III |
| Transmission Fluid Capacity (Approximate) | 298 mm Converter Dry: 11.25 l (11.9 qt) |
| Transmission Type: 4 | Four Forward Gears |
| Transmission Type: L | Longitudinal Mount |
| Transmission Type: 60 | Product Series |
| Transmission Type: E | Electronic Controls |
| Position Quadrant | P, R, N, Overdrive (Circle D), D, 2, 1 P, R, N, Overdrive (Circle D), 3, 2, 1 |
| Case Material | Die Cast Aluminum |
| Transmission Weight Dry (Approximate) | 298 mm Converter 70.5 kg (155.70 lb) |
| Transmission Weight Wet (Approximate) | 298 mm Converter 80.5 kg (176.16 lb) |