LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1543 (Automatic Transmission - 4L60-E/4L65-E (Introduction, Service & Replacement)) >> Repair Instructions >> Vent Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transmission Vent Hose & Lower Retaining Clip
    GM173664Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission vent hose to the transmission vent tube.

    Orient the transmission vent hose check valve as noted during prior to removal.

  2. Secure the transmission vent hose to the lower retaining clip.
  3. Lower the vehicle.