LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1541 (Seat Belt System) >> Repair Instructions >> Shoulder Belt Guide Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Shoulder Harness Guide Bracket & Bolts
    GM213981Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the bolts attaching the shoulder harness guide bracket.

    Tighten:  Tighten the shoulder harness guide bracket bolts to 27 N.m (20 lb ft).

  2. Fig 2: Folding Top
    GM214138Courtesy of GENERAL MOTORS CORP.
  3. Install the folding top. Refer to Folding Top Replacement in Roof.