LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1541 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Right Front (Convertible) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Belt Guide Bracket Stud & Upper Guide
    GM213980Courtesy of GENERAL MOTORS CORP.
  1. Uncover the upper guide nut by pushing up at the belt edge of the cover and flipping up the cover.
  2. Remove the nut attaching upper guide.
  3. Remove the washer and spacer from the stud.
    4. Fig 2: Lock Pillar Upper Trim Panel
    GM214020Courtesy of GENERAL MOTORS CORP.
  4. Remove the screw attaching the upper lock pillar trim panel.
  5. Remove the upper lock pillar trim panel.
    6. Fig 3: Lock Pillar Lower Trim Panel
    GM214018Courtesy of GENERAL MOTORS CORP.
  6. Remove the sill plate trim.
  7. Remove the lower lock pillar trim panel.
    8. Fig 4: Retractor Side Seat Belt
    GM280813Courtesy of GENERAL MOTORS CORP.
  8. Remove the bolt attaching the upper retractor.
  9. Remove the bolt attaching the lower retractor.
  10. Remove the retractor side of the seat belt.
scientia non olet · About LEMON Manuals