LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1541 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Left Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Left Front Buckle Side Seat Belt
    GM63768Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the buckle side seat belt to the drivers seat track.

    Tighten:  Tighten the buckle side nut to 50 N.m (37 lb ft).

  2. Connect the electrical connector.
  3. Install the seat. Refer to Seat Replacement (Power) or Seat Replacement (Manual) in Seats.
scientia non olet · About LEMON Manuals