LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1541 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Child Restraint Tether Anchor Plate & Bolt
    GM589360Courtesy of GENERAL MOTORS CORP.
  1. Remove the child restraint tether strap from the anchor plate, if the child restraint is installed.
  2. Reposition the rear compartment floor carpet to expose the anchor plate bolt.
  3. Remove the bolt and the anchor plate.