LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1540 (Hydraulic Brake System) >> Repair Instructions >> Vacuum Brake Booster Check Valve and/or Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Brake Booster Vacuum Hose To Intake Manifold
    GM63938Courtesy of GENERAL MOTORS CORP.
  1. Connect the brake booster vacuum hose to the intake manifold, if disconnected previously.
  2. Install the intake manifold, if removed previously. Refer to Intake Manifold Replacement in Engine Mechanical.
    3. Fig 2: Identifying Vacuum Booster Hose
    GM63936Courtesy of GENERAL MOTORS CORP.
  3. Install the vacuum check valve to the brake booster, if removed previously.
  4. Connect the booster vacuum hose to the brake booster check valve.
scientia non olet · About LEMON Manuals