LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1537 (Engine Mechanical (Repair Instructions 1 Of 3) - 5.7L) >> Repair Instructions (On-Vehicle & Off-Vehicle - Part 1 >> On-Vehicle Repair Instructions >> Drive Belt Idler Pulley Replacement - Air Conditioning >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: A/C Drive Belt Idler Pulley
    GM289960Courtesy of GENERAL MOTORS CORP.
  1. Loosen the air conditioning (A/C) drive belt idler pulley bolt.
  2. Remove the A/C drive belt. Refer to Drive Belt Replacement - Air Conditioning .
  3. Remove the A/C drive belt idler pulley.
scientia non olet · About LEMON Manuals