LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Stationary Window System) >> Repair Instructions >> Weatherstrip Side Retainer Replacement (Coupe and Convertible) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Windshield Weatherstrip To Windshield Frame
    GM71174Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield weatherstrip from the weatherstrip side retainer and partially from the windshield frame. Refer to Weatherstrip Replacement (Coupe and Convertible)  or Weatherstrip Replacement (Hardtop) .
    2. Fig 2: Weatherstrip Side Retainer Screws To Side Reveal Molding & Applique
    GM71175Courtesy of GENERAL MOTORS CORP.
  2. Remove the weatherstrip side retainer screws from the side reveal molding and the applique.
  3. Remove the retainer. If the retainer is to be reused, remove the old foam sealing tape from the retainer.
  4. Remove any old foam sealing tape from the retainer mounting surfaces.
scientia non olet · About LEMON Manuals