LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Stationary Window System) >> Repair Instructions >> Side Reveal Molding Replacement (Coupe and Convertible) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Weatherstrip Side Retainer Screws To Side Reveal Molding & Applique
    GM71175Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield weatherstrip side retainer. Refer to Weatherstrip Side Retainer Replacement (Coupe and Convertible)  or Weatherstrip Side Retainer Replacement (Hardtop) .
    2. Fig 2: Applique To Windshield Frame
    GM71176Courtesy of GENERAL MOTORS CORP.
  2. Remove the windshield side reveal molding screws.
  3. Peel away the reveal molding with the applique from the windshield frame.
  4. Remove the applique from the reveal molding.
  5. Clean all surfaces.
scientia non olet · About LEMON Manuals