LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Stationary Window System) >> Repair Instructions >> Rearview Mirror Replacement (DD8) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector To Back Of Inside Rearview Mirror
    GM375840Courtesy of GENERAL MOTORS CORP.
  1. Remove the electrical connector (1) from the back of the inside rearview mirror.
  2. Fig 2: Inside Rearview Mirror Support
    GM161480Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do NOT pull rearward on the mirror while removing the mirror or damage to the support and/or windshield will occur.
  3. Rock the mirror from side to side pushing upward firmly.

    An audible click is heard when the inside rearview mirror is releasing from the support.

  4. Remove the inside rearview mirror support.