LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Stationary Window System) >> Repair Instructions >> Rearview Mirror Replacement (DD8) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector To Back Of Inside Rearview Mirror
    GM375840Courtesy of GENERAL MOTORS CORP.
  1. Install the electrical connector (1) to the back of the inside rearview mirror.
    2. Fig 2: Inside Rearview Mirror To Windshield
    GM161476Courtesy of GENERAL MOTORS CORP.
  2. Perform the following steps to install the inside rearview mirror:
    1. Center the bottom of the inside rearview mirror on the support.
      2. IMPORTANT: Do NOT pull rearward on the mirror while installing the mirror or damage to the support and/or windshield will occur.
    2. Rock the inside rearview mirror from side to side while pushing downward firmly. Take care not to damage the windshield.
    3. An audible click is heard when the inside rearview mirror is fully seated.
scientia non olet · About LEMON Manuals