Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Folding Top With The #1 Bow And The #5 Bow Up

Courtesy of GENERAL MOTORS CORP.

Position the #1 bow and the #5 bow up.

Fig 2: Push-In Retainers To Bottom Of Rear Side Rail Weatherstrip

Courtesy of GENERAL MOTORS CORP.

Remove the push-in retainers from the bottom of the rear side rail weatherstrip.
Remove the weatherstrip.
Clean the adhesive from the mounting surface using 3M™ P/N 8984 or equivalent.