LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1535 (Folding Roof System) >> Repair Instructions >> Folding Top Stowage Compartment Lid Switch Replace >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Harness To Lid Release Switch
    GM458135Courtesy of GENERAL MOTORS CORP.
  1. Connect the harness (2) to the lid release switch.
  2. Align the electrical harness to the slot in the rear compartment lid.
  3. Install the lid release switch to the rear compartment lid, pressing until fully seated.
  4. Check for the proper operation of the lid switch.
  5. Position the folding top to the original position.
scientia non olet · About LEMON Manuals