LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1535 (Folding Roof System) >> Repair Instructions >> Folding Top Stowage Compartment Lid Struts Replace >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Right & Left Folding Top Stowage Lid Struts To Rear Of Hinges
    GM284752Courtesy of GENERAL MOTORS CORP.
  1. Open the rear stowage compartment lid.
    2. Fig 2: Stowage Lid, Rear Compartment Lid & Over Top Of Quarter Panels
    GM214147Courtesy of GENERAL MOTORS CORP.
  2. Position the rod end of the strut through the access hole between the quarter panel and the support.
  3. Install the strut to the rear ball stud.
  4. Close the rear stowage compartment.
    5. Fig 3: Folding Top Stowage Compartment
    GM284777Courtesy of GENERAL MOTORS CORP.
  5. Open the folding top stowage compartment.
  6. Install the rod end of the strut to the front of the hinge.
  7. Close the folding top stowage compartment.
scientia non olet · About LEMON Manuals