LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1535 (Folding Roof System) >> Repair Instructions >> Folding Top Stowage Compartment Lid Protector >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Folding Top Stowage Compartment Lid Protector/Molding
    GM213986Courtesy of GENERAL MOTORS CORP.
  1. Using a heat gun preheat the adhesive on the new protector.
  2. Peel the backing from the protector.
  3. Position the protector inside the lid depression with the ends of the protector flush with the forward edge of the lid.
  4. Press the protector firmly into the lid depression.
scientia non olet · About LEMON Manuals