Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Rivet the stay pad to the #1 bow.

Fig 1: Staple Stay Pad To #2, #3, & #4 Bow

Courtesy of GENERAL MOTORS CORP.

Staple the stay pad to the #4 bow.
Staple the stay pad to the #2 and 3 bows.

Fig 2: Folding Top With The #1 Bow And The #5 Bow Up

Courtesy of GENERAL MOTORS CORP.

Position the #5 bow in the up position.

Fig 3: Stay Pad Staples To Bow

Courtesy of GENERAL MOTORS CORP.

Staple the stay pad to the #5 bow.
Install the folding top cover. Refer to Folding Top Cover Replacement .
Remove the protective cover from the stowage compartment lid.