LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1535 (Folding Roof System) >> Repair Instructions >> Folding Top Seal Compression Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Weatherstrip Screws At Right & Left Front Side Rail
    GM214117Courtesy of GENERAL MOTORS CORP.
  1. Remove the screws from the front side rail seal on the #1 bow.
    2. Fig 2: Seal Compression Panel
    GM777786Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the seal compression panel on the #1 bow.
    3. Fig 3: Seal Compression Panel To Bow
    GM777792Courtesy of GENERAL MOTORS CORP.
  3. Remove the panel.
scientia non olet · About LEMON Manuals