LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1535 (Folding Roof System) >> Repair Instructions >> Folding Top Cover No. 5 Bow Retainer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Folding Top With The #1 Bow And The #5 Bow Up
    GM289910Courtesy of GENERAL MOTORS CORP.
  1. Position the folding top with the #1 and #5 bow up.
  2. Remove the #5 bow weatherstrip. Refer to Weatherstrip Replacement - Folding Top (Front and Center Side Rails)  or Weatherstrip Replacement - Folding Top (Rear Side Rail)  or Weatherstrip Replacement - Folding Top (Number Five Bow) .
    3. Fig 2: Needle Nose Pliers To Top Cover Staples To Bow
    GM784534Courtesy of GENERAL MOTORS CORP.
  3. Use a pair of needle nose pliers to remove the top cover staples to the bow.
  4. Pull top cover away from the bow.
    5. Fig 3: Stay Pad Staples To Bow
    GM790189Courtesy of GENERAL MOTORS CORP.
  5. Use a pair of needle nose pliers to remove the stay pad staples from the bow.
    6. CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  6. From the top of the bow, drill out the rivets from the top cover retainers.
  7. Remove the top cover retainers.
scientia non olet · About LEMON Manuals