LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1534 (Wiper System & Washer System) >> Repair Instructions >> Wiper Motor Crank Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
    2. Fig 1: Disconnecting Wiper Transmission From Wiper Motor Crank Arm
    GM306506Courtesy of GENERAL MOTORS CORP.
  2. Using the J 39232  , disconnect the wiper transmission from the wiper motor crank arm. See Special Tools and Equipment .
    3. Fig 2: Wiper Motor Crank Arm Screw
    GM206241Courtesy of GENERAL MOTORS CORP.
  3. Remove the wiper motor crank arm screw.
  4. Remove the wiper motor crank arm from the wiper motor.
scientia non olet · About LEMON Manuals