Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch to the ACCY position.
Turn the wiper switch to the DELAY position.
Turn the ignition OFF when the wipers are in the innerwipe position and not moving.

Fig 1: Identifying Wiper Blade Release Clip

Courtesy of GENERAL MOTORS CORP.

Press the wiper blade release button in and remove the wiper blade from the inside radius of the wiper arm.

Fig 2: Removing & Installing Wiper Blade At Wiper Arm Hook

Courtesy of GENERAL MOTORS CORP.

Remove the wiper arm out through the opening in the wiper blade.