Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the washer solvent container to gain access to the washer hose pump side. Refer to Washer Solvent Container Replacement .
- Disconnect the washer hose from the washer pump.
- Remove the air inlet grille panel to gain access to the washer hose. Refer to Air Inlet Grille Panel Replacement in Body Front End.
- Disconnect the washer hose from the bottom of the air inlet grille panel.
- Remove the washer hose from the vehicle.