LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1533 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia. Refer to Fascia Replacement - Front Bumper  .
    2. Fig 1: Energy Absorber Bolts And Spacers
    GM63705Courtesy of GENERAL MOTORS CORP.
  2. Remove the energy absorber bolts and spacers.
  3. Remove the energy absorber.
scientia non olet · About LEMON Manuals