LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1530 (Body Front End) >> Repair Instructions >> Wheelhouse Filler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Filler Panel To Frame Rail Bolts
    GM71279Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the bolts attaching the filler panel to the frame rail.
    4. Fig 2: Filler Panel To Lower Fender Flange Bolt
    GM71280Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolt attaching the filler panel to the lower fender flange.
    5. Fig 3: Fender Wheel Opening To Filler Panel Bolts
    GM71281Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolts attaching the fender wheel opening to the filler panel.
    6. Fig 4: Filler Panel To Wheelhouse Panel Bolts
    GM71282Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts attaching the filler panel to the wheelhouse panel.
    7. Fig 5: Wheelhouse Filler Panel
    GM71292Courtesy of GENERAL MOTORS CORP.
  7. Remove the filler panel.
scientia non olet · About LEMON Manuals