LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1530 (Body Front End) >> Repair Instructions >> Seal Replacement - Hood Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Plenum To Hood Seal
    GM71296Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the seal from the plenum panel lip.