LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1530 (Body Front End) >> Repair Instructions >> Seal Replacement - Fender to Hood >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seal At Fender
    GM71283Courtesy of GENERAL MOTORS CORP.
  1. Remove the protective backing from the new seal.
  2. Align the seal to the fender vertical flange.
  3. Press the seal along its full length to secure the seal to the fender.
scientia non olet · About LEMON Manuals