Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Fender & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the front fender. Refer to Fender Replacement - Front .

Fig 2: Hood Stop Bracket To Hood Stop Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the bolts attaching the hood stop bracket to the hood stop. On the passenger side one of the bolts also attaches to the plenum bracket.

Fig 3: Hood Stop Bracket To Hinge Pillar Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the bolts attaching the hood stop bracket to the hinge pillar.

Fig 4: Hood Bumper

Courtesy of GENERAL MOTORS CORP.

Transfer the hood bumper if necessary.