Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cable Sheath Grommet At Latch

Courtesy of GENERAL MOTORS CORP.

Install the cable end into the catch on the latch.
Install the cable sheath grommet into the slotted hole in the latch.

Fig 2: Right Hood Latch & Bolts

Courtesy of GENERAL MOTORS CORP.

Align the latch within the marked area.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts attaching the latch.
Tighten: Tighten the hood latch bolts to 10 N.m (89 lb in).