LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1530 (Body Front End) >> Repair Instructions >> Hood Latch Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Inlet Grille Panel
    GM71294Courtesy of GENERAL MOTORS CORP.
  1. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement  .
  2. Fig 2: Left Hood Latch & Bolts
    GM71288Courtesy of GENERAL MOTORS CORP.
  3. Mark the perimeter of the latch using a grease pencil.
  4. Remove the bolts attaching the latch.
  5. Fig 3: Cable Sheath Grommet At Latch
    GM71291Courtesy of GENERAL MOTORS CORP.
  6. Remove the cable from the push-in retainer attaching the cable sheath to the wheelhouse panel.
  7. Disconnect the cable sheath grommet from the latch.
  8. Disconnect the cable end from the latch.