Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Open and support the hood.
- Lift up the retainer clips on the assist rod using a small flat bladed tool
- Pull the upper end of the assist rod from the ball joint on the hood.
- Pull the lower end of the assist rod from the ball joint on the lower hood hinge.
CAUTION:
Refer to Hood Hold Open Device Caution in Cautions and Notices.
NOTE:
Refer to Liftgate/Hood Assist Rod Notice in Cautions and Notices.