Conditions for Setting the DTC
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- DTC B0022 will set when the steering wheel module deployment loop resistance is less than 1.3 ohms for 300 milliseconds.
- DTC B0024 will set when one of the following conditions occur:
- Steering wheel module high circuits is more than 6 volts for 300 milliseconds.
- Steering wheel module high circuit is less than 2 volts and steering wheel module deployment loop resistance is less than 6 ohms for 300 milliseconds.
- DTC B0026 will set when one of the following conditions occurs:
- Steering wheel module high circuit is less than 2 volts and the steering wheel module deployment loop resistance is more than 4.8 ohms for 500 milliseconds.
- Steering wheel module deployment loop resistance is more than 6 ohms for 300 milliseconds.