LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1525 (Seat System) >> Repair Instructions >> Trim Panel Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Back Recliner Handle
    GM71223Courtesy of GENERAL MOTORS CORP.
  1. Remove the seat back recliner handle. Refer to Seat Back Recliner Handle Replacement - Front .
    2. Fig 2: Switch To Side Trim Panel & Screws
    GM281995Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws attaching the seat side trim panel.
    3. Fig 3: Panel Side To Seat Frame
    GM333451Courtesy of GENERAL MOTORS CORP.
  3. Rock the panel side to side working the barrel post clip (1) out of the seat frame.
    4. Fig 4: Side Trim Panel & Switch Harness
    GM71221Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the switch harness.
  5. Remove the trim panel.
  6. Transfer the switch if necessary.
scientia non olet · About LEMON Manuals