Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Seat Back Cover & Seat Back Release Lever Bezel

Courtesy of GENERAL MOTORS CORP.

Install the foam pad over the seat back frame (if removed).
Attach the foam pad top straps with fir tree fasteners (if removed).
Position the cover over the foam.
Carefully tuck the seat back material behind the release lever bezel.
Zip the cover closed.
Firmly pull the seat back cover down over the seat frame.
Hook the seat back lower trim cover J strip.