LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Body Rear End) >> Repair Instructions >> Strut Replacement - Rear Lift Window Panel >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Strut At Upper Ball Stud
    GM71271Courtesy of GENERAL MOTORS CORP.
  1. Connect the defogger lower electrical connector to the strut.
  2. Install the strut with the rod side down to the lower bracket.
  3. Install the strut to the upper bracket.
  4. Connect the defogger upper electrical connector.
    5. Fig 2: Lift Window Panel And Suitably
    GM71238Courtesy of GENERAL MOTORS CORP.
  5. Remove the lift window panel support and close the lift window panel.
scientia non olet · About LEMON Manuals