LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Body Rear End) >> Repair Instructions >> Strut Replacement - Rear Compartment Lid >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Compartment Lid
    GM214003Courtesy of GENERAL MOTORS CORP.
  1. Snap the strut onto the lower ball stud.
  2. Snap the strut onto the upper ball stud.
  3. Close the lid.
scientia non olet · About LEMON Manuals